About McCrometer — Because Flow Matters, For All of Us
McCrometer is one of the world’s most trusted names in flow measurement. Headquartered in Hemet, California, the company has been engineering precision flow meters for more than 70 years, starting in 1955 with the original McPropeller® meter that became the United States’ best-selling propeller flow meter. Today McCrometer is part of Veralto’s Water Quality Platform, alongside Hach, ChemTreat, Trojan Technologies, OTT Hydromet, Aquatic Informatics, Sea-Bird and XOS — one of the deepest water-instrumentation ecosystems in the world.
The brand spans four product franchises: electromagnetic mag meters (Dura Mag, FPI Mag® Plus, SPI Mag, Field Mag, Vera Mag, Ultra Mag), differential pressure meters (V-Cone®, Wafer-Cone®), propeller meters (McPropeller®, Hach Water Specialties®), and the Hach Flow open channel line (FLO-DAR®, FH950, FL900, FL1500). Every McCrometer instrument is engineered to deliver accurate, dependable flow data for the most demanding liquid, steam and gas applications.
What sets McCrometer apart is engineering judgment forged on real-world installations — canal headworks in the American West, refinery utility loops, gas processing skids, cooling-tower returns, irrigation pivots, wastewater outfalls, and municipal supply mains. Every product family is designed with the field installer in mind: hot-tap insertion options (FPI Mag Plus, SPI Mag) that eliminate dewatering, fusion-bonded epoxy liners that resist abrasion, NVLAP-accredited factory calibration that gives engineers a defensible accuracy claim, and integrated telemetry (SmartTrax™, FlowConnect®) that turns isolated meters into a connected data network.
Why Engineers Choose McCrometer
Patented Performance
McCrometer invented the V-Cone® built-in flow conditioning DP meter in 1985 and the FPI Mag® insertion electromagnetic meter that lets engineers hot-tap a fully-functional mag meter into pipe sizes from 4″ up to 138″ — technologies that competitors copy but rarely match.
Accuracy You Can Stake a Project On
V-Cone meters hold ±0.5% of rate; FPI Mag Plus 5000 delivers full-bore equivalent accuracy from a single insertion point; McPropeller is calibrated to within ±2% across the full operating range. All factory calibration is performed at McCrometer’s NVLAP-accredited Lab (Code 201023-0).
Designed for Tight Pipe Runs
The V-Cone needs as little as 0–3 pipe diameters upstream — a fraction of the straight-pipe required by orifice plates or ultrasonic meters. Critical for retrofits, skids and dense piping where space is the constraint.
Hot-Tap Installation
FPI Mag Plus and SPI Mag insertion meters can be installed under pressure, eliminating the need to shut down, drain or dewater a line. For municipalities and continuous-process plants, that’s the difference between a planned outage and a routine maintenance day.
Low Lifecycle Cost
No moving parts on V-Cone, mag meter or open-channel sensors means no wear, no recalibration drift, and no scheduled replacement. McCrometer meters routinely run 20+ years in service with no operator intervention beyond visual checks.
Connected by Design
SmartTrax™ and SmartTrax™ OnBoard wireless telemetry, FlowConnect® data services, and the FSDATA online platform turn isolated meters into a continuous data feed — ready for irrigation district reporting, utility billing, NPDES compliance or plant DCS integration.
V-Cone® & Wafer-Cone® Differential Pressure Flow Meters
The V-Cone is McCrometer’s flagship product and one of the most successful differential-pressure flow meters ever engineered. It uses a centerline-mounted cone to condition the flow profile inside the meter body, which means it can deliver high accuracy in pipe runs where orifice plates would fail, ultrasonic meters would lose signal lock, and Coriolis meters would price the project out. It is widely used for water, steam, natural gas, LNG, crude oil, wet gas, cooling water, slurries and corrosive liquids.
V-Cone® — The Standard for In-line Flow Conditioning
Accuracy: ±0.5% of rate · Repeatability: ±0.1% · Turndown: 10:1 typical, up to 30:1 · Service life: 25+ years
Built-in flow conditioning means short upstream straight runs (as low as 0–3D), an inherently stable signal even in noisy or pulsating flow, and a meter body that fits into tight retrofits. NVLAP-accredited calibration. ISO Pressure Equipment Directive (PED) compliant. Sized using McCrometer’s free V-Cone Sizing Tool.
V-Cone®
Patented in-line conditioning DP meter for liquid, steam and gas in mild to harsh service. ±0.5% accuracy, 25+ year life, retrofit-friendly.
Wafer-Cone®
Compact, flangeless DP meter that fits between standard flanges — ideal for tight retrofits and small-bore applications without sacrificing V-Cone accuracy.
Common Vietnam applications: Steam injection in poultry and food processing, refinery utility metering, gas pipeline custody transfer, LNG/CNG fueling, district cooling distribution, refinery off-gas flares, irrigation main lines, cogeneration plant boiler feedwater — anywhere accurate flow with limited straight pipe is required.
Electromagnetic (Mag) Flow Meters
McCrometer’s electromagnetic flow meter range is the most complete on the market — from agricultural Dura Mag through municipal Ultra Mag, the field-deployable battery-powered Field Mag, the industrial Vera Mag, and the unique FPI Mag Plus insertion mag meter that installs through a hot tap in pipes from 4″ to 138″. No moving parts, no pressure drop, and minimal maintenance — mag meters are the backbone of modern water and wastewater measurement.
Full-Bore Industrial Mag Meters
The full-bore range is built around the Vera Mag (high-performance industrial), Field Mag (battery-powered remote field installations), and Ultra Mag (municipal water and wastewater). Each is available in 3000 and 5000 series electronics, with grooved, flanged and meter-mount options.
Vera Mag® 3000
High-performance industrial full-bore mag for harsh water and process duty. Paired with ProComm Go signal converter. Low-maintenance, long service life.
Vera Mag® 5000
The 5000-series upgrade for the most demanding industrial water, slurries and sludges. Multi-electrode design and ProComm Max transmitter for advanced data and outputs.
Field Mag® 3000
Rugged battery-powered mag meter for water transfer, produced water and mining sites with no AC power. Fusion-bonded epoxy liner, easy connections, durable in remote service.
Field Mag® 5000
The 5000-series Field Mag for water transfer and oil & gas. Higher temperature/pressure ratings, Modbus data, and reliable performance in remote installations.
FPI Mag® Plus — Hot-Tap Insertion Mag Meters
The FPI Mag Plus is McCrometer’s signature municipal and industrial product. It installs through a single hot-tap into the pipe wall, eliminating the dewatering, line modifications and downtime that full-bore mag meters demand. Its multi-electrode sensor array delivers accuracy that rivals full-bore mag meters — making it the go-to retrofit solution for water utilities, cooling water systems and refinery utility loops worldwide.
FPI Mag® Plus 3000
Cost-effective hot-tap insertion mag meter for previously-unmetered sites. Easy installation, multiple flow media compatibility, paired with ProComm Go.
FPI Mag® Plus 5000
Premium multi-electrode hot-tap insertion mag with ProComm Max transmitter. Full-bore equivalent accuracy from a single insertion point, advanced diagnostics and outputs.
SPI Mag® 3000
Single-point insertion mag for cost-effective liquid flow measurement in pressurized closed-conduit pipe. Velocity-and-diameter calculation, ProComm Go output.
SPI Mag® 5000
5000-series single-point insertion mag with ProComm Max for advanced data communication and integration. Accurate flow across a wide range.
Ultra Mag® & Hach FPI Mag — Municipal Water Workhorses
The Ultra Mag (3000 / 5000) is McCrometer’s purpose-built municipal full-bore mag for potable water, treated effluent and water-treatment plant duty. Engineered for the AWWA market, with fusion-bonded epoxy liner, low-power consumption electronics and the option of grooved-end or flanged connections, the Ultra Mag is in service across thousands of water utilities globally. The Hach FPI Mag 3000 / 5000 is the municipal-branded variant of the FPI Mag Plus, configured specifically for water utility hot-tap insertion service.
Ultra Mag® 3000
Inline AWWA-compliant municipal magnetic flow meter, resistant to abrasion and corrosion, with the ProComm Go signal converter for utility data communication and integration.
Ultra Mag® 5000
Premium municipal full-bore mag with ProComm Max transmitter. Ideal for high-accuracy potable water billing, treatment plant influent/effluent and utility master-metering.
Hach FPI Mag® 3000
The municipal-branded FPI Mag insertion meter. Hot-tap installation in tight retrofits, AWWA-grade accuracy, no shut-down required.
Hach FPI Mag® 5000
Premium municipal insertion meter with ProComm Max. HART, Modbus, dual 4–20 mA — the cost-effective answer to retrofitting an unmetered distribution line.
Dura Mag™ & McMag 2000 — Agriculture & Irrigation
The Dura Mag and McMag 2000 are the McCrometer mag meters for agricultural irrigation, groundwater allocation and turf-and-landscape water management. Built to survive in canal headworks, pivot-feed laterals and groundwater wells where conditions are hostile to most electronics — and pair natively with SmartTrax™ OnBoard telemetry for remote reporting to district offices.
Dura Mag®
Battery-powered flanged mag meter with 5-year battery life. Pre-calibrated, internal data logger with 5 years of storage, telemetry-ready output options. Built for ag-and-irrigation duty.
Mc®Mag 2000™
The only mag meter on the market priced near a propeller meter — and the only mag meter that works with flow straighteners. Easy to read, minimal maintenance, retrofit-friendly for existing McPropeller installations.
Propeller & Mechanical Flow Meters
McCrometer’s propeller meters are the franchise that started the company. The original McPropeller is the best-selling propeller meter in the United States and is in service across thousands of irrigation districts, farms, water utility distribution mains and industrial closed-conduit installations. Mechanical, robust, easy to install and easy to read, propeller meters remain the most cost-effective choice for medium-to-large pipe sizes where good (not laboratory-grade) accuracy is required.
McPropeller®
The US best-seller since 1955. Saddle-mount and flanged variants, lifetime components, low installation cost, easy serviceability. Standard for irrigation and closed-conduit water.
Hach Water Specialties®
Heavy-duty propeller meter line for utility distribution. Mechanical or digital registers, ±2% accuracy, custom lay lengths, designed for service temperatures up to 140°F.
FS100 Flow Straightener™
Breakthrough flow-straightening technology for tight retrofits. Eliminates swirl, restores velocity profile, halves upstream straight-run requirements for propeller and mag meters.
Open Channel Flow Solutions (Hach Flow by McCrometer)
For wastewater collection systems, stormwater monitoring, irrigation channels and combined-sewer overflow studies, McCrometer’s Hach Flow open-channel line is the global reference. The FLO-DAR® non-contact radar sensor, the FH950 portable handheld and the FL900/FL1500 logger families form an integrated open-channel measurement system used by municipalities, EPA studies and consulting engineers worldwide. NPDES-grade traceable data, paired with the FSDATA cloud platform for analysis and reporting.
FLO-DAR® Sensor
Non-contact radar area-velocity sensor mounted above the flow. No fouling, no sediment buildup. Stainless steel construction for harsh sewer environments.
FH950 Handheld Flow Meter
Battery-powered portable handheld for spot-check open channel measurement — ideal for stream gauging, channel verification and turbulent/shallow flows.
FL900 Flow Logger
Portable, battery-powered open-channel logger for stormwater, I&I and sewer monitoring studies. Multi-sensor inputs, ATEX-rated variants for confined-space deployment.
FL1500 Stationary Flow Logger
Permanent installation flow logger with multi-sensor data collection. Integrates rain gauges, level sensors and AV sensors into one auditable data record.
Open channel accessories supplied: US9000 ultrasonic level sensor (FL900-compatible), BL9000 bubble level flow sensor, submerged area-velocity sensor, rain gauge funnel sensor, and the FSDATA online application for remote monitoring and reporting.
Electronics & Telemetry Solutions
McCrometer’s signal transmitter and telemetry portfolio is what turns a meter into a data source. From the entry-level ProComm® Go battery-powered signal converter through the advanced ProComm® Max with multi-point curve-fitting, dual 4–20 mA outputs, RS485 and HART, every meter can be paired with an electronics package that fits the application’s power, signal output and communications requirements. For remote and distributed installations, SmartTrax™ and SmartTrax™ OnBoard wireless telemetry deliver flow data to a hosted dashboard or to third-party SCADA without the cost and complexity of running cable to every site.
ProComm® Go
Battery-powered cost-efficient signal transmitter. User-configurable, accurate flow rate and velocity display, isolated pulse outputs. Ideal for remote sites with no AC power.
ProComm® Max
Advanced signal transmitter with multi-point curve-fitting, dual 4–20 mA outputs, RS485 / HART communications and backlit LCD. Mag meter accuracy meets process plant data.
FlowCom®
Battery-powered remote telemetry unit. Wireless flow and sensor data to a hosted dashboard. AMI-compliant pulse inputs and 5V analog outputs for sensor integration.
SmartTrax™
Cellular wireless remote telemetry with ExactRead™ technology. Standalone unit or integrated within the FlowCom register. Remote meter and sensor readings at an economical price point.
SmartTrax™ OnBoard
FlowCom electronics with telemetry built in — zero external hardware. Streamlined data recording and transmission for irrigation and remote agricultural sites. Battery-powered.
FlowConnect®
Built-in telemetry for McPropeller and Water Specialties. Automated flow-data collection for water resource management. Favored by Natural Resource Districts for compliance reporting.
FSDATA™ Online
Cloud platform that unlocks remote monitoring, programming and reporting across your entire McCrometer fleet. View, audit and export flow data from anywhere.
Real-World Applications & Installations
McCrometer flow meters are not lab instruments — they are designed and proven in the field. The images below are real installations of McCrometer mag meters, V-Cones and Hach Flow loggers in production service worldwide. The same engineering judgment applies to your Vietnamese projects.
Sewer & Stormwater Monitoring
FLO-DAR + FL900 deployment in a municipal manhole — non-contact area-velocity sensing for combined-sewer overflow studies and inflow/infiltration analysis.
Refinery Cooling Water Loop
FPI Mag Plus 3000 hot-tapped into a refinery cooling water main with ProComm Go — no shutdown, no dewatering, accurate flow in days not weeks.
Potable Water Utility Master Meter
Ultra Mag 3000 in a water utility vault, full-bore AWWA-compliant master meter with ProComm Go for SCADA integration.
Irrigation & Groundwater Allocation
Dura Mag with ProComm Go canopy at a pivot-feed lateral — 5-year battery, telemetry-ready, designed for canal-headworks and well-house duty.
Steam Metering for Process Plant
V-Cone for steam injection in food processing — the same meter Pilgrim’s Pride and other process plants rely on for accuracy in tight piping with minimal straight run.
Remote Irrigation Monitoring
SmartTrax™ OnBoard mounted on a FlowCom-equipped propeller meter at a remote ag site — real-time flow data on a hosted dashboard, no field visits required.
Oil & Gas Produced Water Transfer
Field Mag 3000 battery-powered mag meter on a remote produced-water transfer skid — mining and upstream oil & gas duty without AC power.
NVLAP Calibration & Repair Center
McCrometer’s NVLAP-accredited Calibration Laboratory (Lab Code 201023-0) — the same lab that certifies every new meter also services installed-base meters via the Meter Repair Program.
Industries We Serve in Vietnam
McCrometer flow meters are specified into virtually every water- and process-intensive industry in Vietnam. Nhan Viet ICS JSC supports the country’s operators, EPC contractors and consulting engineers with product selection, project pricing, lead-time management and post-installation calibration support across:
Oil & Gas
Upstream produced-water transfer, midstream gas custody, downstream refinery utility metering, LNG and CNG fueling. V-Cone for gas and steam, Field Mag for produced water, FPI Mag Plus for refinery cooling water loops.
Power Generation
Thermal, combined-cycle and renewable balance-of-plant: boiler feedwater, condenser cooling water, demin water, fuel gas. V-Cone for steam, FPI Mag Plus for hot-tap cooling water retrofits.
Municipal Water & Wastewater
Treatment plant influent and effluent, distribution network monitoring, NPDES compliance, lift stations, combined-sewer overflow studies. Ultra Mag, Hach FPI Mag and the FLO-DAR / FL900 / FL1500 line are utility standards.
Agriculture & Irrigation
Canal headworks, pivot feed lines, groundwater allocation, district-level water accounting. McPropeller, Dura Mag and McMag 2000 paired with SmartTrax OnBoard make compliance reporting nearly turnkey.
Mining & Minerals
Process water, slurry returns, tailings, dewatering pumps and water-balance management. Field Mag and Vera Mag stand up to abrasion and corrosion; V-Cone handles process steam in mineral processing.
Industrial Process & Manufacturing
Pulp & paper, chemical, fertilizer, food & beverage, pharmaceutical, semiconductor cooling. Cooling-tower make-up, plant utilities, steam metering, CIP/SIP water — the McCrometer range covers them all.
Cooling Water Systems
Cooling-tower make-up, condenser circulation, chilled-water distribution. FPI Mag Plus hot-tap installation adds metering without shutting the cooling system down.
Fire Protection & Industrial Water
Hydrant and fire-water main flow verification, fire-pump testing, water-supply auditing for fire-protection agencies and industrial fire systems.
HVAC & District Cooling
Chilled-water plant supply and return, condenser water, district-cooling distribution metering for hotels, commercial complexes and industrial parks. V-Cone, Wafer-Cone and FPI Mag Plus are the typical fits.
Global Certifications & Standards
One of the reasons McCrometer flow meters are specified into international engineering standards is the breadth of third-party certification and traceability behind every meter. Depending on model and configuration, McCrometer products carry approvals and conformance statements including:
ISO 9001 Quality Management
ISO Pressure Equipment Directive (PED)
AWWA C701 / C704 / C710 / C750
NSF/ANSI 61 (Drinking Water)
ATEX / IECEx (selected models)
FM / CSA
CE Marking
Build America, Buy America (BABA) Compliant Products
Modbus / HART / Profibus Output Options
Nhan Viet ICS JSC can supply the relevant certificates — material test reports (EN 10204 3.1), NVLAP-traceable calibration certificates, hazardous-area certificates and project-specific quality documentation — as part of the project documentation package. Where a project requires specific localized approvals or country-of-origin documentation for import, our project team manages that workflow.
Why Partner with Nhan Viet ICS JSC for McCrometer in Vietnam
Specifying a global flow-meter brand into a Vietnamese project is only half the equation. The other half is whether the local partner can support that brand with engineering judgment, project documentation, in-country stock and post-sale technical support. That is the role Nhan Viet ICS JSC plays for McCrometer.
Authorized Distributor
Nhan Viet ICS JSC is an authorized McCrometer channel partner in Vietnam — meaning the products we supply are factory-original, fully warranted, calibrated at McCrometer’s NVLAP-accredited Lab and shipped with the documentation trail expected by EPC contractors and owner-operators.
Engineering-Led Selection
Our team does not just take part numbers. We work through your application (process fluid, pipe size, available straight-run, line pressure, temperature, accuracy target, signal output, hazardous-area zone) and specify the right meter family — V-Cone, FPI Mag, Ultra Mag or McPropeller — the first time. That avoids re-specification, change orders and field replacements.
Local Stock & Lead-Time Management
For high-runner Dura Mag, McPropeller, ProComm Go and selected V-Cone sizes we hold local stock. For engineered items — large V-Cones, custom FPI Mag Plus configurations and SmartTrax telemetry packages — we manage the factory lead time and shipping logistics so your project schedule stays predictable.
Project Documentation
NVLAP calibration certificates, material test reports (EN 10204 3.1), hazardous-area certificates, datasheets, GA drawings and customer-specific QA documents — assembled and delivered in the format your project demands.
After-Sales, Telemetry & Calibration
Ongoing calibration support, replacement parts, troubleshooting and field service. We also support customers on commissioning of SmartTrax telemetry and FSDATA dashboards so the data starts flowing on day one.
Vietnam-Wide Reach
From our base in Ho Chi Minh City, we serve industrial clusters nationwide — Bà Rịa-Vũng Tàu and Đồng Nai for oil & gas, the southern provinces for power and water, Quảng Ngãi and Dung Quất, the northern industrial parks around Hanoi and Hải Phòng, and the Mekong Delta for agriculture and irrigation.
McCrometer sits alongside our other tier-one principals — Ashcroft, Precision Flow, Sandvik, Flexitallic, Kentintrol, Canalta, Accuflow, Novafast and MCU Coating — so we can package multi-brand instrument and flow-control scope into a single project bill of materials when that is the most efficient way to deliver.
Calibration, Lead Times & After-Sales Support
The reality of plant and utility operations is that a flow meter is bought once but lived with for years — and the data it produces is often used to invoice customers, report to a regulator or shut down a process safely. We design our customer relationship around the full lifecycle, not just the initial purchase.
Calibration Services
Every McCrometer V-Cone, mag meter, propeller meter and signal transmitter we supply can be ordered with a traceable NVLAP-accredited calibration certificate. For installed-base meters, we coordinate periodic re-calibration so plant turnaround windows and utility reporting cycles are met without surprises.
Lead-Time Visibility
Standard mag meter sizes, McPropeller saddles, ProComm Go transmitters and small-bore V-Cones typically ship in short lead times. Engineered items — large V-Cones, custom FPI Mag Plus assemblies, BABA-compliant configurations and SmartTrax telemetry packages — have longer factory cycles. We provide firm lead-time commitments at quote time and expedite project critical-path items.
Spare Parts & Replacements
Propeller registers, mag meter electrode kits, ProComm Go and Max replacement transmitters, FlowCom batteries, FLO-DAR mounting hardware — the field-replaceable items are stocked or on short lead time. We help customers build a recommended-spares list at project handover.
Meter Repair Program (MRP)
McCrometer’s factory Meter Repair Program lets aging meters be returned, refurbished, re-calibrated and returned to service for a fraction of the cost of a new meter — with the new-meter warranty restored. Nhan Viet manages MRP logistics for Vietnamese customers.
Frequently Asked Questions
Is Nhan Viet ICS JSC an authorized McCrometer distributor in Vietnam?
Yes. Nhan Viet ICS JSC supplies McCrometer flow meters in Vietnam as an authorized channel partner. All products are factory-original, carry the manufacturer’s warranty, ship with NVLAP-accredited calibration certificates, and are supplied with the documentation required by EPC contractors and owner-operators.
Which McCrometer products can you supply?
We can quote the complete McCrometer portfolio: V-Cone® and Wafer-Cone® differential pressure flow meters; Dura Mag, McMag 2000, FPI Mag® Plus, SPI Mag, Field Mag, Vera Mag and Ultra Mag electromagnetic flow meters; McPropeller® and Hach Water Specialties® propeller meters; FLO-DAR®, FH950, FL900, FL1500, US9000 and BL9000 open channel sensors and loggers; ProComm Go, ProComm Max and FlowCom electronics; and SmartTrax™ / SmartTrax™ OnBoard / FlowConnect® telemetry solutions.
What is the V-Cone and why is it specified so often?
The V-Cone is McCrometer’s patented differential pressure meter, in production since 1985 with more than 75,000 units installed worldwide. Its centerline cone conditions the flow inside the meter body, so it delivers ±0.5% of rate accuracy with as little as 0–3 pipe diameters of upstream straight run — a fraction of what an orifice plate or venturi requires. With no moving parts, a 25+ year service life and NVLAP-accredited factory calibration, it is the meter of choice for steam, gas, LNG, crude oil, cooling water and tight-retrofit applications.
What makes the FPI Mag® Plus special?
The FPI Mag Plus is an insertion electromagnetic flow meter that installs through a hot tap in the pipe wall — no need to shut down, drain or modify the line. Its multi-electrode sensor array delivers full-bore-equivalent accuracy from a single insertion point. Pipe size range is 4″ through 138″.
Do you supply calibration certificates traceable to international standards?
Yes. All McCrometer V-Cones and mag meters are calibrated at the McCrometer NVLAP-accredited Calibration Laboratory (Lab Code 201023-0). NVLAP-traceable calibration certificates are issued with the meter and can be bundled with material test reports (EN 10204 3.1) and hazardous-area certificates as part of the project documentation package.
What are typical lead times for McCrometer meters in Vietnam?
Standard catalog mag meters, McPropeller saddles, ProComm Go transmitters and small-bore V-Cones typically ship in short lead times. Engineered items have longer factory cycles. We provide firm lead times with every quote and expedite project critical-path items.
Which industries in Vietnam use McCrometer flow meters?
Oil & gas, power generation, municipal water and wastewater treatment, agriculture and irrigation, mining and minerals, pulp & paper, chemicals, food & beverage, fire protection, HVAC and district cooling.
Can McCrometer meters integrate with our SCADA / DCS?
Yes. ProComm Go provides isolated pulse output; ProComm Max adds dual 4–20 mA, RS485 and HART. The FlowCom electronics and SmartTrax telemetry solutions integrate directly with third-party SCADA over Modbus or via the FSDATA cloud platform.
How do I request a quotation for McCrometer products?
Send your requirements to sales@nvicsco.com or call +84 0984 334 748. Our engineering team will review and respond, typically within one to two business days for standard items.
Request a Quote or Talk to an Engineer
Tell us about your application — process fluid, pipe size, available straight-run, line conditions, accuracy target, output requirements and project timeline. Our engineering team will respond with a configured McCrometer solution, NVLAP-traceable calibration, pricing and lead time.
📍 Office: 12/9 Trường Chinh Street, Tân Bình Ward, Ho Chi Minh City, Vietnam
📞 Phone: +84 0984 334 748
✉️ Email: sales@nvicsco.com
🕐 Hours: Monday – Friday, 08:00 – 17:00 (ICT)