MCU Coatings International is a manufacturer of single-component, moisture-curing polyurea (MCU) protective coatings, supplied worldwide through a network of authorized distributors. The technology was developed to do the job where conventional systems fail – delivering extreme corrosion protection with greater flexibility, chemical resistance and high abrasion and impact resistance from coatings that are remarkably easy to apply.
Because MCU coatings cure with ambient humidity, they are highly surface tolerant and largely free of the climate restrictions that limit epoxy and polyurethane systems. A complete three-layer system can be applied in a single day, and the up-to-three-times-longer life cycle versus epoxy / polyurethane has virtually eliminated most of the key causes of premature coating failure.
One primer for almost any surface prep – UHP water jetting, dry or wet abrasive blasting, power- or hand-tool cleaning – and it tolerates flash rusting.
MCU chemistry delivers up to three times the life cycle of epoxy / polyurethane systems, lowering total maintenance cost over the life of the asset.
Moisture curing means application in high humidity and a wide temperature range, with fewer weather windows lost on site.
No mixing ratios or induction times – one component, high DFT tolerance and unlimited recoat by itself reduce application error and rework.
Proven in salt and fresh water immersion, splash zone and atmospheric exposure for marine, offshore and water/wastewater structures.
A full three-coat system can be applied in a single day, and MCU-QuickCure speeds cure times by up to 80% to maximise production.
Nhan Viet ICS JSC supplies the full MCU Coatings range – primers, intermediates, topcoats, high-heat coatings and accelerators. Tell us your substrate, service environment and surface prep and we will recommend the right system.
MCU Coatings are engineered and tested for the most demanding protective-coating duties.
We help you build the right MCU system – primer, intermediate and topcoat – for your substrate, surface prep and exposure.
As your distribution partner in Vietnam, we supply genuine MCU Coatings with full technical data sheets and documentation.
We support contractors and asset owners with quotations, system specifications and coordinated delivery for projects of any size.
MCU’s overcoatability makes maintenance simple – we help you extend asset life with spot repair and overcoat programs.
From surface prep to DFT and recoat windows, we share MCU best practice so your crews apply with confidence.
Protective coatings complement our valve, sealing and instrumentation lines – one partner for plant reliability.
The right MCU system depends on the substrate, the achievable surface preparation, the service environment (atmospheric, immersion, splash zone, high heat) and the required appearance. Share these details with Nhan Viet ICS JSC and we will recommend a primer / intermediate / topcoat build with the appropriate dry film thicknesses.
Lead times depend on product, colour and quantity. Contact us with your system, colour (RAL or custom) and volume and we will provide a quotation and an indicative delivery schedule.
We support your team with technical data sheets, surface-prep and application guidance, and ongoing supply for maintenance and overcoat programs – helping you get the full life-cycle benefit of MCU technology.
Nhan Viet ICS JSC supplies and supports MCU Coatings products for customers in Vietnam, including primers, intermediates, topcoats, high-heat coatings and accelerators with full technical documentation.
MCU coatings are single-component coatings that cure by reacting with ambient humidity. This gives them extreme surface tolerance, application in difficult climates and excellent corrosion, abrasion and chemical resistance.
MCU is single-component (no mixing), far more surface tolerant, and largely free of climate restrictions. It offers up to three times the life cycle of epoxy / polyurethane systems and a full three-coat system can be applied in one day.
MCU primers work over a wide range of preparation – UHP water jetting, dry or wet abrasive blasting, and power- or hand-tool cleaning – and tolerate flash rusting, so Sa 2.5 is not always required for strong performance.
Yes. Because MCU cures with moisture, it can be applied across a wide temperature range and in high humidity, reducing lost weather windows on site.
Yes. Products such as MCU-MioZinc, MCU-Mastic and MCU-Ferroguard are designed for salt or fresh water immersion, splash zone and submerged structures including ballast tanks and water/wastewater assets.
Yes. MCU-Aluminium HH is heat resistant to 650°C and MCU-Zinc HH to 420°C, used together as a high-temperature anticorrosive system.
MCU-Zinc for zinc-rich galvanic protection (Class B slip), MCU-MioZinc for immersion and high surface tolerance, or MCU-AluPrime as a penetrating sealer with outstanding abrasion resistance. We can advise based on your substrate and exposure.
Contact Nhan Viet ICS JSC with your substrate, service environment, surface preparation, colour and quantity. We will recommend the right MCU system and provide pricing and an indicative lead time.
Talk to Nhan Viet ICS JSC about MCU Coatings protective coating systems for your project in Vietnam.
Nhan Viet ICS JSC – Flow Control Solutions
Website: nhanvietgroup.vn